Standard saw blades for rough dividing cuts of soft and hard woods.
Standard saw blades for multiple machines and table saws for ripping and cross cutting soft and hard woods.
For ripping and cross cutting soft and hard woods, chipboard panels, single and multiple chipboard, laminated panels.
Standard saw blades with wiper slots for ripping dry or wet soft woods.
Spezial saw blades for cutting melamine faced board materials on both sides. For use on table saws and vertical panel sizing saws.
For table saws, for boards, chipboards and MDF with plastic cover on both sides.
For processing soft woods, boards, veneered boards and MDF.
For processing hard woods, boards, chipboards and MDF with plastic cover on both sides.
Used together with panel sizing blade to avoid chipping on lower side of panels coated on both sides with plastic. With spacers inside, the kerf can be adjusted according to the main saw blade. This blade is delivered with 3 spacers.
Used together with panel sizing blade to avoid chipping on lower side of panels coated on both sides with plastic.
Standard saw blades for cutting firewood.
With negative rake angle, for cutting solid aluminium bar.
With positive rake angle, for cutting walled aluminium and other nonferrous-metal sections.
For portable electric saws.
For all materials used on building sites.
To read or download the product sheets you need the Adobe Acrobat Reader. If the Adobe Acrobat Reader is not present you can load it down free of charge by clicking the following picture.
Carbide-tipped circular saw blades from in-house production with bigger diameters as shown in the product lists can be offered according to your request.
Special saw blades for thin cutting width.
For dry cutting in mild steel, copper, profiled sheet, aluminium, cable channel, etc.
For cutting plastic, profiled timber and plastic covered coreboards.
For cutting plastic and wood.
For cutting steel tube, steel bar, track beam, and nonferrous-metal tube.
Different blades of certain product groups are also available with laser ornaments or copper rivets for reducing noise.
© Copyright 2006 - 2007 by Star Saws & Tools GmbH | Data Protection